SC-41 Generator of digital pulse for injectors and test-bank controller

SC-41.gif (50204 bytes)
Driver:
Four Mono-point and one multi-point injectors.
Indication:
RPM Engine.
Injection pulse width time.
Activate exits.
Selection of six programs:

-RPM manual selection from 500 to 7000RPM by steps of 500RPM with injection pulse width time manual selection from 1.5ms to 7ms by 0.5ms steps. This program in used to verify the nominal injector condition.

-RPM manual selection from 500 to 7000RPM by steps of 500RPM with automatic Injection pulse width time variable from 1.5ms to 7ms by 0.5ms steps. This program in used to compare the fuel APORTE of different injector at fix RPM with all condition of injector aperture time.

-RPM automatic variable from 500 to 7000RPM by steps of 500RPM with injection pulse width time manual selection from 1.5ms to 7ms by 0.5ms steps. This program is used to compare the fuel APORTE of different injector at fix injector aperture time with all RPM condition.

-RPM automatic variable from 500 to 7000RPM by steps of 500RPM with automatic variable injection pulse width time from 1.5ms to 7ms by 0.5ms steps. This program is used to compare the fuel APORTE of different injector at all condition of RPM and injector aperture time. This program in used to exit injector at clean operation too.

-Injector totally open. This program in used to observe the CONE injected.

-Injector totally close. This program in used to verify GOTEO of the injector.

 

$2.gif (19935 bytes)

Atrás ] Pricipal ] Arriba ] Adelante ]